FS1A Series
No programming required. Easily configure a safety system by simply selecting the logic.
Recommended alternative: FS1B Safety Controller
Key Features
- Built-in 24 patterns of safety circuit logic (FS1A-C11S type). By simply selecting the logic using the dip switch on the main unit, system configurations compatible with various machines are possible.
- Built-in 11 patterns including 4 new logic patterns (FS1A-C21S type).
- Supports various types of safety systems such as mode switching, partial stop, and full stop.
- One unit can handle various safety inputs, from emergency stop pushbutton switches to safety light curtains.
- Monitors the status of safety inputs and outputs, as well as SafetyOne error information through monitor output.
- SafetyOne is equipped with solenoid drive output, reducing the number of outputs required on the PLC side.
- Meets safety performance up to Safety Integrity Level 3 of the IEC61508 series, Performance Level e of ISO13849-1, and Safety Category 4 of N954-1.
