HS7A-DMP Non-Contact Magnetic
Added a 3-contact type. The auxiliary contacts allow the open/closed status of each door to be monitored by a PLC or similar device.
Key Features
The operation signal from the auxiliary contact can be directly input to a controller such as a PLC, enabling operation monitoring of each HS7A-DMP type non-contact safety switch., Ideal for installation on protective doors and other locations where positioning is difficult., Supports up to Category 4 (EN ISO 13849-1). (By appropriately combining with a dedicated safety relay module, support up to Category 4 is possible.), Up to 36 sets can be connected. (When using safety relay module: HR1SDME type), Protection structure achieves IP67.
