Up to 10 text message function blocks can be used. Please see Page 182 of the Instruction Manual. Â

Last Updated: 04/15/04

Yes, it is possible to monitor the counter's present and current values if using the SmartRelay with LCD display. By changing the SmartRelay's setting to parameter mode, the following parameters can be monitored:

• Timer's preset and current value.

• Counter's preset and current value

• Present value of the run time counter

• Analog preset and current values

Last Updated: 04/15/04

Yes. WindLGC can be used to display the number of blocks being used. While Info Window is open (press F4 on keyboard to open) press F2 on keyboard and a message on Info Window will display how many function blocks are being used. IDEC SmartRelay with LCD panel, it can be found in the program edit mode.

Last Updated: 04/15/04