Home > Products > Operator Interface > HG1F-4.6inch

TouchScreens HG1F-4.6 inch



Documents and Download

  • File Type
  • File Size
  • Download
Sales Brochure
  • PDF
  • 939KB
  • 4.6" STN Monochrome Screen sales brochure, 12 pages.

Catalog PDF
  • PDF
  • 762KB

Solution Packages & Starter Kits
  • PDF
  • 547KB

Datasheet
  • PDF
  • 245KB
  • 2page specifications.

User's Manual
  • PDF
  • 90KB
  • WindOI-NV2 Users Manual - Complete information on Host Interface (List of PLC drivers and communication info), Hardware and Instructions set.

WindOI-NV2 Tutorial Guide
  • PDF
  • 7.18MB
  • Step by step process on configuring the touchscreen and parts/objects.

HG1B to HG1F Conversion Tool
  • Converts HG1B program to HG1F

    install Converter Tool (HG1FConv_110.exe)


    NOTE: The following errors will not be detected during conversion from HG1B to HG1F: (If you are using Text with Blink & Reverse and/or LSD 7 in your HG1B project, please follow the “Solution” or Instruction Manual to correct the error when using WindO/I-NV2 software.)

    Error: Using TEXT with Animation: Blink & Reverse
    Description: The Text with Blink & Reverse in HG1B is different from HG1F.
    Solution: If you want a Blink & Reverse effect, use either the Message Switching Display or Multi-State Lamp in WindOI-NV2 software. Make sure to switch the text using the Trigger Condition.

    Error:     Behavior of LSD 7 (Scan Counter)
    Description: The Scan Counter of HG1A/HG1B resets after switching screens. However, the Scan Counter of HG1F doesn't reset when the screen is switched.
    Solution: In WindOI-NV2 software, to reset the Scan Counter after switching screens, you must set the command to reset LSD 7 (on the screen you are switching to).

    Conversion Tool Instruction Manual


    Revision History




Downloader - Utility software to communicate with OI
  • Conveniently downloads project data (Created in WindOI-NV2 software) to the IDEC Touchscreen without viewing the program. No need of WindOI-NV2 software.

    Uploads history data in CSV file format-Alarm Log and Trend Log Data.



    install Downloader Software

    (Downloader_V142.exe)




    download Downloader Manual






Record Viewer – Software Tool
  • RecordViewer operates separately from WindO/I-NV2 software. This is available when Record Viewer is checked during installation of WindO/I-NV2 or can be installed at a later time.


    Record Viewer supports the following functions:

    1. Uploading history data in CSV file - Alarm log and Logging Data stored in the Idec Touch screen.

    2. Initializing history data stored in the Idec Touch screen

    3. Displaying History Data from the CF card.



    install Version 2.31 Software (RecordViewer_231_Web_E.exe)


    Support tool displays and upload historical data.


    download Record Viewer Manual



Installation Sheet
  • PDF
  • 422KB
  • Instructions on operation and installation.

CAD
  • ZIP
  • 101KB